585590
8
Zoom out
Zoom in
Previous page
1/38
Next page
4 KODAK EKTAGRAPHIC III Slide Projector
Operation
EKTAGRAPHIC III BR and ABR Slide Projectors have a sensing capability
to automatically set the proper power cycle (50 or 60 Hz). This eliminates the
need to manually change the two-position switch included on models
manufactured before November 1996. These projectors are shipped with a
detachable power cord that is packaged separately (not wound on the Power
Cord Retainer).
A spare fuse is provided. The fuse is located in the small, pull-out storage door
below the Power Inlet. Simply pull the door with your finger. Remove the
spent fuse with a small object (e.g., pencil tip) by pushing the fuse up and
removing it from the receptacle. Press the spare fuse into the receptacle and
close the storage door.
Important
The EKTAGRAPHIC III BR and ABR Slide Projectors are supplied with a
3-wire grounding power cord to comply with UL122 (USA) and CSA222
(Canada) safety and electrical standards. We urge you to provide a permanent,
properly installed 3-wire receptacle as the source of power for this projector.
For advice and assistance, call a licensed electrician or your local power
company.
When used outside the United States of America, please use a proper adapter
that ensures grounding and polarization.
Although the Models III BR and ABR are approved to the standards of UL
and CSA, they are not intended to meet approval in all countries worldwide.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak EKTAGRAPHIC III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak EKTAGRAPHIC III in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info