585589
22
Zoom out
Zoom in
Previous page
1/62
Next page
Contents
22
Special considerations:
The communication with the hardware is handled via a
serial communications connection to your Macintosh.
As with all communication devices, extra care must be
taken both in connecting the device and using it. Here
are some points to remember:
1. The hardware serial connection must be connected
to either the MODEM or PRINTER port of your
Macintosh. If you connect to the printer port, you
must check the Use Printer Port option in the
control panel.
2. When using the remote control, you must be sure
that all other installed devices / protocols
(FaxModem software, AppleTalk, etc.) that use the
port you have selected are either disabled (via the
software supplied with the product) or switched to
the other port.
3. After use you should re-enable all devices that were
disabled in step 2 above.
PowerBook:
If you are using the Interactive Remote Control with a
PowerBook portable with no printer port, please
observe the following:
1. Be sure that AppleTalk is turned off before using
the Interactive Remote Control. If AppleTalk was on,
you may have to restart your PowerBook for the
changes to take affect.
2. If you have a built in modem, select the external
modem option in the PowerBook control panel
3. If you get an alert to the extent that you cannot turn
off the internal modem because it is in use, follow
these steps:
a) Go into the control panel of the control panel,
and make sure the software is turned off (the
LED on the main switch will be green)
b) Now you should be able to select the external
modem option in the PowerBook control panel.
c) Afterwards, you can simply turn ON the driver
via the control panel and you should not need
to restart.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak DP800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak DP800 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info