539405
11
Zoom out
Zoom in
Previous page
1/13
Next page
11
SPOKE MAGNET
1. Unscrew the two halves of the magnet and mount
to a spoke on the front wheel of your bicycle. (Fig 3.4)
2. Tighten the screw using a flat head screwdriver to ensure
the magnet cannot move up and down the spoke.
TRANSMITTER UNIT
The wireless transmitter unit is designed to allow easy, fast
fitment and removal to the front wheel forks.
1. Chose a suitable location on your forks that will enable
a good line of sight between the transmitter up to the
main unit with minimal physical obstructions. (Fig 3.5)
2. Ensure the SENSOR text is located on the wheel side
of the fork to ensure a close proximity to the spoke
magnet.
3. Ensure the arrow on the silicon housing is pointing
upward towards the main unit.
4. Pull the silicon strap around the fork and fit it over the
hook. Chose the most suitable one of the two hooks on
the strap, depending on your fork diameter.
5. Once mounted, move the transmitter unit around to
ensure the closest mounting position relative to the
spoke magnet. Optimum sensing distance between the
magnet and the transmitter housing is <5mm. (Fig 3.6)
The silicon strap on the transmitter unit is has two
loops and is designed to accommodate fork diameters
from 20mm up to around 45mm.
Fig 3.4
Fig 3.5
Fig 3.6
11
* = N.E.R.D Wireless 12 Function Cycle Computer only
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Knog Nerd 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Knog Nerd 9 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Knog Nerd 9

Knog Nerd 9 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info