Manual Knog Nerd 12 (page 4 of 13) (English)

539409

Zoom out

Zoom in

1/13

DATA SETTING PROCESS (Fig 1.1)

1. All user-input data is adjusted for each digit separately.

The current digit to be set will flash.

2. Press

to increase the digit value by 1.

3. Hold down

for 2 seconds to advance to the next

digit.

4. Press

to store the on-screen data and advance to the

next data setting.

5. Once all data setting is complete, hold down

for 2

seconds to exit the data setting mode. This can also be

done at any point whilst in data setting mode, leaving

the remaining un-set data with a

reading.

INITIATING THE COMPUTER (ALL CLEAR) (Fig 1.2)

1. A battery is already loaded in the main unit when

purchased. Hold down

and

simultaneously for 3

seconds to initiate the computer and clear all data.

It is important to initiate the computer before first

usage to prevent the computer producing errors.

2. The LCD segments will be tested automatically after the

unit is initiated.

3. Press

to stop LCD test. You will then see a flashing

KM/H.

UNIT SELECTION (Fig 1.3)

Press

to toggle between KM/H or M/H (Mile/hour). Press

to confirm the current selection.

CIRCUMFERENCE DATA SETTING (Fig 1.4a)

1. The display shows

for the Bike

default

circumference value of 2155mm. Measure the value for

your wheel by following the steps below. (The Bike

default circumference value is 2050mm.)*

MEASURING WHEEL CIRCUMFERENCE (Fig 1.4b)

Roll the wheel until the valve stem is at its lowest point

(closest to the ground) then mark this first point on

the ground. Roll the bicycle forward until the wheel has

completed one full revolution and the valve stem returns

to its lowest point. Mark the second point on the ground.

Measure the distance between the marks. Enter this value

to set the wheel circumference. It is important that this

measurement is accurate to ensure correct data input

when riding.

ODOMETER AND TOTAL TRIP TIME DATA SETTING (Fig

1.5)

1. Designed for entering in previous data of ODO

ODO

*, T.TIMED TRIP

and T.TIMED TRIP

* after a

battery replacement. A new user does not need to set

this data. Each press of

advances to the next data

setting screen.

2. Adjust the digits as described in the Data Setting

Process. (Fig 1.1)

MAIN UNIT SETUP

Fig 1.1

DATA SETTING PROCESS

2 seconds 2 seconds

* = N.E.R.D Wireless 12 Function Cycle Computer only

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Knog Nerd 12 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Knog Nerd 12

Knog Nerd 12 User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Knog Nerd 12 Manual

Product: