Manual Klipsch SW-450 (page 2 of 10) (English, French)

588364

Zoom out

Zoom in

1/10

WARNING

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

The exclamation point, within an equilateral triangle, is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

The lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electrical shock to persons.

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wider blade or the

third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or

pinched, particularly at plugs, convenience receptacles,

and the point where it exits from the apparatus.

11. ONLY USE attachments/accessories speciﬁed by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/ apparatus combination to

avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when

unused for long periods of time.

14. REFER all servicing to qualiﬁed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

15. DO NOT expose this apparatus to dripping or splashing

and ensure that no objects ﬁlled with liquids, such as

vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain

readily operable.

Important Safety Information

Klipsch powered subwoofers are designed to reproduce deep bass

and deliver the impact that makes your movies and music come

alive. For optimum performance, place your subwoofer in a corner of

the room on the same wall as your front channel speakers. (refer to

Figures 1 and 2). Please note that room placement can have a dra-

matic effect on the performance of your powered subwoofer. Corner

placement, as suggested above, will increase the amount of bass

output, while placing the subwoofer along the middle of a wall, or

out in the room will decrease the amount of bass output. Experiment

with a number of different placement options and control settings

to ﬁnd the one that best suits your particular room and taste. When

choosing your subwoofer’s location, keep in mind that you will need

to connect the subwoofer’s built-in ampliﬁer to an AC power outlet.

Positioning Your Subwoofer

WARNING:

To reduce the risk of fire or electrical shock, do not expose

this apparatus to rain or moisture.

WARNING: No naked ﬂame sources – such as candles – should be

placed on the product.

Optimal Connections – Klipsch SW powered subwoofers can be

connected to the subwoofer output of your electronics via the RCA

jack inputs (“LINE IN”) on the subwoofer’s rear panel (refer to

Figure 3). This can be in place of the conventional speaker wire

connections (“SPEAKER LEVEL IN”). For more information on the

controls mentioned in this manual and on bass management, see

your dealer or visit www.klipsch.com.

Conventional Speaker Wire Connections – Using 16-gauge or

larger speaker wire, connect the RED “positive” (+) terminal of

your ampliﬁer’s LEFT channel to the RED (+) terminal of your

subwoofer’s LEFT channel input (“SPEAKER Level IN”). Connect

the BLACK “negative” (-) terminal of your ampliﬁer’s LEFT channel

to the BLACK “negative” (-) terminal of your subwoofer’s LEFT

channel input (“SPEAKER Level IN”). Repeat this procedure for

connecting your ampliﬁer’s RIGHT channel to your subwoofer’s

RIGHT channel input (refer to Figure 4). Take care to en0sure

Connections and Controls

WARNING: Batteries (battery pack or batteries installed) shall not be

exposed to excessive heat such as sunshine, ﬁre or the like.

Place the equipment near a main power supply outlet and make sure

that you can easily access the power breaker switch.

WARNING: This product is intended to be operated ONLY from the

AC Voltages listed on the back panel or included power supply of the

product. Operation from other voltages other than those indicated

may cause irreversible damage to the product and void the product’s

warranty. The use of AC Plug Adapters is cautioned because it can

allow the product to be plugged into voltages in which the product was

not designed to operate. If the product is equipped with a detachable

power cord, use only the type provided with your product or by your

local distributor and/or retailer. If you are unsure of the correct

operational voltage, please contact your local distributor and/or retailer.

English

I have the SW 450 model. One day the unit stopped working. Couldn't get it on... after a few months passed unit decided to play, without any work being done to the unit, suddenly it stopped working and haven't had the luck to getting it on again. Fuse is good and so is the chord, opened the uit and done a visual inspection, which nothing seems burned, please advise., Submitted on 21-10-2024 at 12:03
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch SW-450 in the language / languages: English, French as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klipsch SW-450 Manual

Product: