584805
4
Zoom out
Zoom in
Previous page
1/9
Next page
Page 6
Page 7
Caution: Turn o your preamplier/receiver and your subwoofer before making any connections!
Inputs and Outputs
Line In
Your Palladium Series powered sub
-
woofer is connected via line-level
inputs are provided and either may
be used. Do not connect both at
the same time. Use the “Subwoofer,
“LFE” or “Pre-amp outputs of your
systems electronics to connect to
the “LINE IN” input connections of
your subwoofer. Use high-quality,
shielded, line-level cables for these
connections.
Line Out
This jack can be used as an alternate
method of connecting a second
subwoofer to your system. This
second subwoofer can function as
a “slave to the primary subwoofer.
(For more on this, see the “Back Pan
-
el Features section of this manual.)
RCA-type and XLR inputs are pro
-
vided and either may be used. Do
not connect both at the same time.
Use high-quality, shielded, line-level
cables for these connections.
Connecting the Subwoofer
Touch Panel Controls
All of the subwoofers controls and settings are
accessed through the touch-panel key pad and
display located on the top of the subwoofer’s
cabinet. The only exception to this is the main AC
power switch, which is located on the rear panel
of the subwoofer.
Use the
(Up) or
(Down) touch keys to
scroll through the list of control options.
Use the
(Left) or
(Right) touch keys to
make adjustments to a given control setting.
Use the (Enter) touch key when the or
“Enter appears on the display to store
and recall custom settings or to lock the keypad.
After adjusting the individual control param-
eters for “Volume, “EQ Mode, “Lowpass”, “Low-
pass Slope and “Phase, your settings can be stored in one of ve user memories (“Movie, “Music, “Night,
“User 1” and “User 2”). This allows for global recall of all of the above settings to tailor the subwoofers
performance to compensate for diering source material and uses.
The display backlighting will turn o if no keypad inputs are made for 10 seconds.
The display will return to the “Volume screen if no keypad inputs are made for 10 seconds.
If the display is in standby mode or on the default volume menu during normal operation, the initial key
press will turn on the display backlighting. The second key press will initiate a control adjustment or the
selection of another mode.
In periods of low humidity, it is possible that a static electricity discharge to the subwoofer may cause a
momentary interruption in the subwoofers output or changes to the LCD display content. Any display
content errors will be corrected when the screen changes modes.
Volume
Use the left and right touch keys to adjust the subwoofers volume level to match the output of your main
speakers. Press and hold (or press and release) the Left touch key to decrease the subwoofers volume. Press
and hold (or press and release) the Right touch key to increase the subwoofer’s volume to the desired level.
From this screen, press the Down touch key to access other control settings.
Recall Settings
This screen is used to select any one of ve user-dened memory presets titled “Movie, “Music, “Night, “User 1”
and “User 2”. Use the Left/Right touch keys to select the desired group of stored control settings and press the
Enter key to apply them. “Settings Recalled!” will then be displayed. During initial setup, skip this screen until all
other initial control adjustments have been made. If nothing has been saved in the selected preset, the display
will read “Preset Empty. From this screen, press the Down or Up touch key to access other control settings.
Features and Controls
Use the (Enter) touch key when the or
Use the (Enter) touch key when the or
Use the (Enter) touch key when the or
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch P-312W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch P-312W in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info