584802
7
Zoom out
Zoom in
Previous page
1/12
Next page
We Want Your Klipsch Product to Look and
Sound as Good as When it Left the Factory.
Please Check Promptly for Transit Damage.
Each Klipsch product is individually tested for sonic quality and inspected for superior appearance
before it leaves the Hope, Arkansas factory. Your loudspeaker left the factory in perfect condition in
packaging carefully engineered to protect both the working parts and finish. However, in certain
extreme circumstances, the products may be damaged in transit.
To ensure that your loudspeaker is in its original condition, please inspect it immediately. If any damage
is discovered, notify the authorized Klipsch dealer that the unit was purchased from or the transporta-
tion company responsible for safe delivery. In the latter case, make a request for inspection from the
transportation company and hold the product in its original shipping carton for the inspector. After a
joint inspection report is made, file a claim with the transportation company.
Subwoofer Placement
Your Klipsch subwoofer is designed to operate at frequencies below 120Hz which are essentially omni-
directional (difcult to localize). There may be several options for the placement of the subwoofer in
your room which will affect its frequency response and output level. Corner placement improves the
acoustic loading of the subwoofer, increasing its output and dynamic range capabilities. The least amount
of output will result when the subwoofer is placed away from walls or in the center of the room.
Asymmetrical placement of two subwoofers in a room may improve low frequency reproduction by pro-
viding a smoother and more consistent response pattern. Since even minor repositioning can result in an
audible performance change, experiment with different locations for best results.
In most cases, we recommend that the subwoofer be placed in the vicinity of the speakers with which it
is being paired. A subwoofer reproducing front channel bass will generally perform better when placed in
the same end of the room as the main speakers. A subwoofer connected to the rear channels of a sur-
round system typically performs best when positioned in the rear of the room.
If your subwoofer is to be placed in an enclosed cabinet, provisions should be made to ventilate the heat
radiated by the enclosed amplifier. Additionally, since a portion of the acoustic output is generated by the
side-firing drivers, a minimum of several inches of space should be provided around the subwoofer. The
front of the cabinet should be acoustically transparent.
How to Connect Your LF Series Subwoofer
AC Power
Since your subwoofer has an internal power amplifier, it must be plugged into a nearby AC wall outlet.
The subwoofer should be unplugged from the AC power with the power switch in the OFF position dur-
ing hookup and installation. To eliminate a tripping hazard, all connections should be unplugged from
the back panel of the subwoofer if it is being moved. Avoid extremely long extension cords of small
gauge since they can impair the performance of the subwoofers amplifier and present a potential fire
hazard. If the subwoofer will not be used for an extended period of time, unplug the power cord from
the AC power outlet.
Note: 230 volt models are not supplied with an AC power cord but are equipped with an IEC-type
power cord socket.
CAUTION: SINCE YOUR KLIPSCH SUBWOOFER HAS BUILT-IN ELECTRONICS, DO NOT PLACE
IT NEAR SOURCES OF HEAT OR MOISTURE. TAKE CARE TO ROUTE THE POWER CORD SO
THAT IT WILL NOT BE CUT, DAMAGED OR PINCHED.
!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch LF-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch LF-10 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info