584712
5
Zoom out
Zoom in
Previous page
1/36
Next page
PACKING LIST
1. SOUNDBAR
2. WIRELESS SUBWOOFER
3. SOUNDBAR POWER SUPPLY/POWER CORD
4. SUBWOOFER POWER CORD
5. 4.9 FOOT (1.5M) DIGITAL OPTICAL CABLE
6. DUAL RCA CABLE
7. TWO CRADLES
8. ONE REMOTE CONTROL
9. QUICK SETUP GUIDE
10. SOUNDBAR WALL-MOUNT TEMPLATE
11. THIS OWNER’S MANUAL
SOUNDBAR FRONT
SOUNDBAR REAR
SOUNDBAR RIGHT SIDE
SUBWOOFER REAR
SUBWOOFER STATUS LIGHT
BLUE (Solid): Receiving wireless signal from soundbar
RED (Solid): Searching for soundbar wireless signal
PLACEMENT/INSTALLATION
1. Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a
flat surface directly in front of your TV on its two supplied cradles, on a shelf direct-
ly above or below your TV in a piece of furniture or wall-mounted (via keyholes on
the rear of the soundbar) under a TV that is also wall-mounted. If wall-mounting,
first, use the supplied wall-mount template to mount soundbar. If the two mounting
holes drill into wall studs, screw two wood screws in those holes to hang the sound-
bar on. If there are no wall studs where the holes are drilled, use wall anchors that
support at least 7 pounds (3kg) each to hang the soundbar on. Connect cable from
TV (see Connection section) to soundbar and hang soundbar on wall.
2. Placing the subwoofer: The subwoofer is designed to be placed on the floor in the
same room within 50 feet (15m) of the soundbar near an electrical outlet. For
maximum bass output, place the subwoofer in a corner on the same wall as the TV
and soundbar. Once the soundbar has been connected to the TV and plugged into a
wall outlet, plug the subwoofer into a wall outlet.
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Volume Control
Status Light
Main Power ON/OFF
Power Cord Input
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Main Power
Power Supply InputAnalog RCA Inputs
Digital Optical
Cable Input
TV
TV
3.5mm Analog Input
STATUS LIGHTS
SOURCE MUTE VOLUME DOWN VOLUME UP
SOUNDBAR STATUS LIGHT
RED: In STANDBY (“Sleep”) Mode
GREEN: On Digital Optical Cable Input
ORANGE: On Analog RCA L/R Input
ORANGE (Flashing): RCA Input muted
GREEN (Flashing): Digital Input muted
RED (Flashing): Failure to learn a remote
control command
GREEN OR ORANGE FLASHES: A remote
control signal has been received
BLUE:
On 3.5 mm Analog Input
RED and GREEN (Alternating):
Remote Programming
WHITE (Left Status Light):
In 3D Surround Mode
(Right status light, unless stated)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch HD Theater SB 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch HD Theater SB 3 in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Klipsch HD Theater SB 3

Klipsch HD Theater SB 3 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info