Manual Klipsch CP SERIES (page 12 of 60) (English, French, Spanish)

584647

Zoom out

Zoom in

1/60

STEP 3

A. Connect Speaker Wires to Speaker Terminals with screwdriver

or DRILL SET ON LOWEST TORQUE SETTING WITH #2 PHILIPS

SCREWDRIVER BIT. Observe the correct polarity. Usually, red

wire is positive (+) and black is negative (–). It does not matter

which wire is connected to the positive or negative terminal as

long as the connections are consistent on all speakers in the

same system. Make sure both wires are pushed inside slot and

replace terminal cover.

IF USING SUPPLIED BRACKET

B. Once speaker is positioned as desired push back all the way back

on bracket arms until ﬂush with bracket caps and screw two

inserted screws all the way in to lock position.

Lowest Dril Torque Setting

1 2 3 4 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch CP SERIES in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 11,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klipsch CP SERIES Manual

Product: