° C and Fahrenheit
You can display the temperature in Fahrenheit or Celsius. To set this up, please press the "Humidity" and key "Timer"
simultaneously. An acoustic signal, the display changes from F to °C.
AIR PURIFICATION AND USE OF THE FILTER
- Please check first whether the filter is installed in the device.
- Press the Mode button and choose the air purification mode. The icon appears on the display.
- The fan runs at a higher speed (you can set the fan speed by pressing the "dehumidification" button; you have
the choice between a high, medium and low speed).
- The filter application time is shown on the display. An asterisk will appear after 4 hours,
two stars after 8 hours, etc., six stars mean 24 hours. Once the 24 hours have been
reached, the number 1 appears (for 1 day) on the display, the asterisks will also appear
by every 4 hours.
- You can replace the filter as necessary. After replacing press the button next to the filter to reset the time of
filter application.
- Please note that the air purification function cannot be activated without the filter.
CONDENSATION WATER DRAINAGE
Water tank:
- When the water tank is full, the corresponding symbol blinks on the display; you can hear the alarm sound.
- Please turn off the power and unplug the power cord.
- Pull out the water tank carefully, remove the tank lid and tilt the water out.
- Then put the lid back on and slide the water tank carefully into the device.
Continuous drainage
- Remove carefully the side cover on the unit by pulling out the screw.
- Put the drainage hose into the opening, put the other end of the hose into a collecting vessel and pour out the
water.
- Make sure that the hose is securely connected to prevent leakage of water.
MAINTENANCE INSTRUCTION
1. Please always unplug the unit before cleaning.
2. Please note that only the plastic filter may be cleaned.
3. Remove the front cover and carefully remove the filter.
4. If the filter is only slightly dusty, you can quickly and easily clean it with a vacuum cleaner.
5. Rinse the filter under running water (max. 40 ° C) and dry it with a soft cloth.
6. Clean the appliance with a damp cloth and then wipe with a dry cloth.
7. Do not use chemical solvents (such as benzene, alcohol) or hot water.
