756165

Klarstein Windwaker Supreme 10031814 Manual

79
Zoom out
Zoom in
Previous page
1/225
Next page
79
Safety Precautions for the installer
• When installing or relocating the unit, be sure to keep the refrigerant circuit free from air or substances
other than the specified refrigerant. Any presence of air or other foreign substance in the refrigerant
circuit will cause system pressure rise or compressor rupture, resulting in injury.
• When installing or moving this unit, do not charge the refrigerant which is not comply with that on
the nameplate or unqualified refrigerant. Otherwise, it may cause abnormal operation, wrong action,
mechanical malfunction or even series safety accident.
• When refrigerant needs to be recovered during relocating or repairing the unit, be sure that the unit
is running in cooling mode.Then, fully close the valve at high pressure side (liquid valve).About 30-
40 seconds later, fully close the valve at low pressure side (gas valve), immediately stop the unit and
disconnect power. Please note that the time for refrigerant recovery should not exceed 1 minute.
If refrigerant recovery takes too much time, air may be sucked in and cause pressure rise or compressor
rupture, resulting in injury.
• During refrigerant recovery, make sure that liquid valve and gas valve are fully closed and power is
disconnected before detaching the connection pipe. If compressor starts running when stop valve
is open and connection pipe is not yet connected, air will be sucked in and cause pressure rise or
compressor rupture, resulting in injury.
• When installing the unit, make sure that connection pipe is securely connected before the compressor
starts running.
If compressor starts running when stop valve is open and connection pipe is not yet connected, air will
be sucked in and cause pressure rise or compressor rupture, resulting in injury.
• Prohibit installing the unit at the place where there may be leaked corrosive gas or flammable gas.
If there leaked gas around the unit, it may cause explosion and other accidents.
• Do not use extension cords for electrical connections. If the electric wire is not long enough, please
contact a local service center authorized and ask for a proper electric wire. Poor connections may lead to
electric shock or fire.
• Use the specified types of wires for electrical connections between the indoor and outdoor units. Firmly
clamp the wires so that their terminals receive no external stresses. Electric wires with insufficient
capacity, wrong wire connections and insecure wire terminals may cause electric shock or fire.
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Windwaker Supreme 10031814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Windwaker Supreme 10031814 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 20,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info