756160
82
Zoom out
Zoom in
Previous page
1/296
Next page
82
EN
Before Installation
When installing or relocating the unit, be sure to keep the refrigerant circuit free
from air or substances other than the specied refrigerant. Any presence of air or
other foreign substance in the refrigerant circuit will cause system pressure rise or
compressor rupture, resulting in injury.
When installing or moving this unit, do not charge the refrigerant which is not
comply with that on the nameplate or unqualied refrigerant. Otherwise, it may
cause abnormal operation, wrong action, mechanical malfunction or even series
safety accident.
When refrigerant needs to be recovered during relocating or repairing the unit,
be sure that the unit is running in cooling mode.Then, fully close the valve at high
pressure side (liquid valve).About 30-40 seconds later, fully close the valve at low
pressure side (gas valve), immediately stop the unit and disconnect power. Please
note that the time for refrigerant recovery should not exceed 1 minute. If refrigerant
recovery takes too much time, air may be sucked in and cause pressure rise or
compressor rupture, resulting in injury.
During refrigerant recovery, make sure that liquid valve and gas valve are fully
closed and power is disconnected before detaching the connection pipe. If
compressor starts running when stop valve is open and connection pipe is not yet
connected, air will be sucked in and cause pressure rise or compressor rupture,
resulting in injury.
When installing the unit, make sure that connection pipe is securely connected
before the compressor starts running. If compressor starts running when stop valve
is open and connection pipe is not yet connected, air will be sucked in and cause
pressure rise or compressor rupture, resulting in injury.
Prohibit installing the unit at the place where there may be leaked corrosive gas
or ammable gas. If there leaked gas around the unit, it may cause explosion and
other accidents.
Do not use extension cords for electrical connections. If the electric wire is not long
enough, please contact a local service center authorized and ask for a proper
electric wire. Poor connections may lead to electric shock or re.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Windwaker Eco 10033601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Windwaker Eco 10033601 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info