756160

Klarstein Windwaker Eco 10033601 Manual

73
Zoom out
Zoom in
Previous page
1/296
Next page
73
EN
SLEEP (Sleep Mode)
When you press this button, you can select Sleep1( ), Sleep2 ( ), Sleep3 ( )
and Sleep OFF. Press this button several times to select the desired prole.
Sleep1: In cooling mode, when sleep function 1 is activated, the temperature of the
air conditioner is increased by 1 °C after one hour running time. After two hours of
operation, the temperature is increased by a further 2 °C. The unit then continues to run
permanently at this temperature. In cooling mode, when sleep function 1 is activated,
the set temperature is reduced by 1 °C after one hour running time. After two hours of
operation, the set temperature is lowered by a further 2 °C. The device then continues
operation with this temperature setting.
Sleep2: In this mode, the unit runs according to the default setting of a group of sleep
temperature curves.
Sleep3: In this mode, all settings can be made by the user.
1 At this time, the remote control time display shows [1 HOUR] and the corresponding
temperature of the last set sleep curve is displayed on the screen and ashes (the
rst time the unit is used, the factory preset initial value of the sleep curve setting is
displayed).
2 Adjust the temperature by pressing the ARROW buttons and conrm your selection
by pressing the TURBO button.
3 At this time, the time position of the remote control is automatically increased by
one hour (this means: 2 HOUR, 3 HOUR , ...to 8 HOUR), the temperature display
shows the corresponding temperature of the last set sleep curve and ashes.
4 Repeat steps 2 and 3 until the temperature setting has been made for the entire 8
hours and the sleep curve setting has been completed. The remote control display
will then return to the original settings.
If you want to use an individualised setting for the sleep curve setting but do not want to
change the temperature, press the TURBO button to continue switching.
Note: If no button is pressed within 10 seconds, the sleep curve setting is
automatically cancelled and the original settings are displayed. If you wish to cancel
the sleep curve setting, you can do so by pressing one of the POWER, MODE, TIMER
and SLEEP buttons.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Windwaker Eco 10033601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Windwaker Eco 10033601 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info