756241
20
Zoom out
Zoom in
Previous page
1/64
Next page
20
EN
PRODUCT INSTALLATION AND USAGE
Installation method
The product can be used directly after removing the package (without installation)
Usage of various function buttons
The buttons are touch buttons. You can tap the buttons on the operation panel to trigger
the corresponding functions.
1. When the power is turned on for the rst time, the buzzer beeps twice and enters
standby mode; except the ON/OFF button, other buttons are invalid.
2. ON/OFF button: in power on state, press this button to turn on/off the device.
After turning on, the system returns to standby mode, and has no output and
display. When the device is rst turned on, the wind speed is level 2, and changes
to level after three seconds. The timer is turned off; swing is turned off; pump
absorbing is turned off; power indicator turns on; the wind mode is normal. After
turning off, the state will be saved, but the timer setting won’t be saved; if the mode
is sleep wind before turning off, the mode won’t be saved, and it will change to
normal wind. In power on state, if there is no button (or remote control) operation
in one minute, the brightness of all LEDs reduces by half; press the button again,
the brightness resumes and performs appropriate action;
3. Speed button: in power on state, rotate this button clockwise to increase the
wind speed from level 1 to level 3; rotate this button counterclockwise to reduce
the wind speed from level 3 to level 1. LED indicator shows the appropriate speed
state.
4. Mode button: the device rst enters normal wind mode; press this button to enter
the natural wind mode, press it again to enter sleep wind mode, and press it again
to enter normal wind mode. In natural wind and sleep wind mode. LED turns on
according to setting. In normal wind mode, no LED is lit.
Press the Mode button to switch the wind modes, which run as follows:
Normal wind: high speed, medium speed, low speed
Natural wind: The main motor of the fan performs irregular operation according
to pre-programmed computer program. Combined with the wind speed button, the
natural wind can be set to high, medium and low level to simulate the effect of nature
wind, and make the wind more soft and comfortable. The wind speed LED displays the
corresponding speed, and the natural wind mode indicator turns on.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Waterfall 10035833 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Waterfall 10035833 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info