756096
34
Zoom out
Zoom in
Previous page
1/116
Next page
34
EN
OPERATION ITEM A
To start cooking
1. Touch the ON/OFF control. After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indica- ting that the induction hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the cooking zone are clean and dry.
3. Select a heating zone by touching „+/-“ control, and a indicator between the
key will ash, the default po- wer setting is levels “5”. If you don’t choose a
heating zone in 1 minute, the induction hob will automatically switch o. You
will need to start again at step 1. You can modify the heat setting at any time
during cooking.
If the display shows during programming:
you have not placed a pan on the correct cooking zone or,
the pan you’re using is not suitable for induction cooking or,
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The
display will automatically turn o after 2 minutes if no suitable pan is placed on it.
When you have nished cooking
1. Turn the cooking zone o by scrolling down „-“ to “0”. Make sure the display
show “0”.
2. Turn the whole cooktop o by touching the ON/OFF control.
3. Beware of hot surfaces! “H” will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.
Using the Timer
You can use the timer in two dierent ways:
You can use it as a minute minder. In this case, the timer will not turn any
cooking zone o when the set time is up.
You can set it to turn one cooking zone o after the set time is up.
You can set the timer up to 99 minutes.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Virtuosa 10029239 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Virtuosa 10029239 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info