705229
38
Zoom out
Zoom in
Previous page
1/41
Next page
38
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state automatically and display cor-
responding protective codes:
Problem Possible Cause What to do
F3/F4 Temperature sensor of the induction coil
fail.
Please contact the supplier.
F9/FA Temperature sensor of the IGBT failure. Please contact the supplier.
E1/E2 Abnormal supply voltage Please inspect whether powersupply is
normal. Power on after the power supply
is normal.
E3 High temperature of the induction coil
temperature sensor.
Please contact the supplier.
E5 High temperature of the IGBT temperture
sensor.
Please restart after the induction hob cools
down.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface mate-
rial to avoid larger deformation caused by the heat radiation from the hotplate. As shown below.
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm)
590 520 55 58 560 490 50 mini
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Virtuosa - 10029241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Virtuosa - 10029241 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info