670273
9
Zoom out
Zoom in
Previous page
1/21
Next page
9
Cleaning and Care
Switch off power supply for blender and pull out plug;
After use, the parts must be cleaned in time;
Never immerse the machine (power unit) in water or any other liquid, nor flush under faucet. Clean the ma-
chine with wet cloth;
The product should be stored in a dry place, avoid direct exposure to ultraviolet rays.
Before storing the product, make sure that the product is clean and dry.
Troubleshooting
Problem Possible Cause and Solution
Unable to work Check if power plug is inserted and stirring cup is correctly installed.
Abnormal smell comes from motor unit
during operation
For the first several operations, it is normal for a new product to cause some
abnormal smell or smoke, and the phenomenon would disappear after
several operations. In addition, the product working for a long time conti-
nuously would also cause abnormal smell or smoke, shut down the product
and cool it down 60min.
Knife blade device or motor unit is stuck
during operation
Power off, move away the cup and scrap raw material on blade with spatula,
and small processing quantity should be added each time.
Stirring cup subject to leakage Power off, move away the cup and pour out raw material, unscrew antic-
lockwise the blade unit for mixing. Check if sealing ring is correctly installed
on the mixing blade holder.
Should boiling hot raw material be poured
into stirring cup?
No, to prevent accessory damage, it is required to allow the liquid or raw
material cool down to Celsius 60 degrees.
Hints on Disposal
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
Declaration of Conformity
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Tuttifrutti - 10030520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Tuttifrutti - 10030520 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info