Manual Klarstein Studio 1 - 10030845 (page 11 of 36) (English, German, French, Italian, Spanish)

670628

Zoom out

Zoom in

1/36

Installation

Unpacking the Appliance

This appliance is heavy. Always seek assistance whilst unpacking and/or during installation. Please read

all the instructions before continuing to unpack or install appliance. Before star ting the installation of this

fireplace, please read the following:

• The installation should be carried out by two adults to avoid injury or damage . If for any reason it is conside-

red too heavy, please obtain assistance.

• When lifting the electric suite, always keep your back straight. Bend your legs and not your back. Avoid twis-

ting at the waist. It is better to reposition your feet.

• Avoid upper body / top heavy bending. Always bend from the knees rather than the waist. Do not lean

forward or sideways while handling the heater.

• Always grip the heater with the palm of the hand. Do not use the tips of fingers for support.

• Always keep the heater as close to the body as possible. This will minimize the cantilever action.

• Use gloves to provide additional grip. Unpack the package and lift the product gently out of the box, put it

on a flat surface with the front panel facing forward.

Before Installation

IMPORTANT: The wall where the appliance is to be installed must be capable of long-term support of the

total load of the appliance. Measures should also be taken to ensure sufficient strength to withstand the force

of earthquakes, vibration and other external forces. Plasterboard alone is not considered to be a structural

material. It is not recommended to rely on plasterboard fixings alone to support the weight of the appliance.

Remove any protective film coatings from the finished/decorative surfaces of the appliance, if any. After ha-

ving selected the final position of the appliance taking into account the integrity of the wall the electric suite

may be secured to the wall. To ensure customer safety, be sure to design the installation so that the strength

of both the wall and any wall fixings used are sufficient. The appliance should not be installed until all wet

plastering and/or dry wall sanding and wall painting has been completed. Do not block the ventilation holes

of the appliance. The wall onto which the appliance is installed must be flat. Install only on a vertical surface.

Avoid sloped surfaces. Installation onto anything other than a vertical wall may result in fire, damage or injury.

If the appliance is to be mounted on the inner leaf of a conventional cavity

brick wall, or a solid wall, then the wall plugs and fixing screws provided may

be used. Depending on the condition of the wall it may be necessary to use

additional fixings. In this situation, any additional fixings and wall plugs should

be of the same size and type as the ones provided.

The wall where the appliance is to be installed must be capable of long-term support of the total load of the

appliance. Measures should also be taken to ensure sufficient strength to withstand the force of earthquakes,

vibration and other external forces. Plasterboard alone is not considered to be a structural material. It is not

recommended to rely on plasterboard fixings alone to support the weight of the appliance.

If the appliance is to be mounted on a dry lined wall or a timber framed construction wall then efforts should

be made to fix one position vertically, into one of the wooden studs, or supporting wooden members of the

wall using the fixing screws provided. If this is not achievable then the wall should be strengthened using ap-

propriate building materials.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Studio 1 - 10030845 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Studio 1 - 10030845 Manual

Product: