670309
18
Zoom out
Zoom in
Previous page
1/46
Next page
18
Cleaning and Care
Always unplug the appliance before removing the attachments and before cleaning the Base.
Never immerse the Base in water or any other liquid.
Clean the Base by wiping it with a damp soapy cloth.
Do not use scouring pads, steel wool or any abrasive cleaning agent to clean the Base as these may damage
the outer surface of the appliance.
The Soup Maker Bowl can be pre-washed with the use of the PULSE button. Simply add some water and
washing-up liquid to the dirty bowl and secure the lid. Then press the PULSE button until the bowl or jug is
clean. When pre-washing the Soup Maker Bowl in this way, make sure the Soup Maker Blade is assembled
in the Bowl.
Disassemble and clean all the attachments separately. Attachments can be washed in warm soapy water.
Be careful not to touch blades or any sharp parts during use and cleaning.
IMPORTANT: Allow all parts to fry fully after cleaning before assembling and using again.
After washing and drying, store the appliance with its attachments in a dry, safe place out of reach of children.
DO NOT PUT THE HEATING BLENDER BASE INTO WARTER OR LIQUID.
Troubleshooting
Problem Solution
The appliance does not switch on. Make sure that the indicator marks (on the lid of the bowl, on the
bowl and on the motor unit) are aligned.
The appliance suddenly stops
running.
The lid of the bowl may have become undone during a heavy proces-
sing job. Close the lid properly. The appliance will start working again.
The appliance is too hot. Set the control knob to OFF to switch off
the appliance and remove the mains plug from the wall socket. Allow
the appliance cool down to room temperature. Plug the appliance in
again and switch it on. Process smaller batches.
The motor of the device runs but
cone of the citrus press does not
turn.
Check that the shaft on the Citrus Press is properly attached.
Check that the sieve of the Citrus Press is properly attached. (Indica-
tion on the sieve points to indication on the handle of the bowl).
Can I clean all removable parts in
the dishwasher?
Yes, except the motor unit and the protection cap for the blade unit.
What does ‘PULSE’ mean? When you press the PULSE button, the appliance will run at its
highest speed as long you keep pressing the button. Using the PULSE
button is recommended if you want to have more control over the
processing job, for instance when you are chopping.
Why does the motor produce a
smell during processing?
It is very common for a new appliance to give off a smell or emit
some smoke the first few times it is used .This will stop after using the
appliance a few times. The appliance may also give off a smell or emit
smoke if it has been used continuously for too long. In that case you
have to switch the appliance off and let it cool down for 60 minutes.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Souprano - 10028960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Souprano - 10028960 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info