705235
26
Zoom out
Zoom in
Previous page
1/84
Next page
26
EN
Use of the hob
1. Place the food pot in the centre of the hob.
2. Plug the mains plug into a 220 V, 10 Amp socket. The induction cooker. The
induction hob can now be used.
3. Press the on/off button rst and then the function button.
4. After cooking, press the on/off button again to turn off the appliance. Then remove
the mains plug from the socket.
Status description
1 Off: plug the power plug into the wall outlet. A signal tone sounds and the power
indicator ashes. The unit is switched off.
2. Standby: if you press the on/off button for a long time while the appliance
is switched off, the appliance switches to standby mode; within the next 60
seconds a function key must be pressed, otherwise the appliance switches itself off
automatically.
3. Automatic pot detection: if you press the temperature button in standby mode, the
appliance automatically detects whether there is a pot on the induction hob or not.
If there is no pot or a pot that is not suitable for induction on the plate, „e0“ ashes
in the digital display and a sound is heard every 3 seconds. If no pot is placed
on the induction hotplate within the next 60 seconds, the appliance switches off
automatically. If, however, you place a pot on the induction hotplate, the appliance
automatically switches to the corresponding operating mode.
4. Operating status: after the automatic pot detection has detected that a pot is on
the induction hob, the appliance switches to the corresponding function mode.
When a pot or pan is removed from the induction hob in the operating mode, the
power supply is immediately interrupted and the appliance automatically switches
to the automatic pot detection mode.
5. Switch off: in operating mode, press the on/off button. A beep sounds and the
appliance switches off.
Power setting (manual function)
1. In standby mode, press the function key to enter the power setting menu, or in
operating mode, press the function key to set the power. The power indicator will
illuminate and the factory default power is 1600w. The led screen will display
„1600“.
2. The power can be adjusted using the + and - buttons. The minimum power setting in
operating status is 120 w and the maximum power setting is 1800 W. If you change
the power, the new wattage will be displayed on the led screen.
3. If you press the function key several times in the operating mode, other functions
can also be used.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein SlimChef - 10033282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein SlimChef - 10033282 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info