Manual Klarstein Passionata 20 - 10031702 (page 18 of 36) (English, German, French)

704229

Zoom out

Zoom in

1/36

USE

BEFORE THE FIRST USE

To ensure the rst cup of coffee tastes excellent, you should rinse the coffee maker with

warm water as follows:

1. Pour water into water tank, the water level should not exceed the “MAX” mark in

the tank. Then close the water tank cover.

Note: the appliance is supplied with a detachable tank for easy cleaning, you can ll

the tank with water rstly, and then put the tank into the appliance.

2. Set steel mesh into metal funnel (no coffee in steel mesh).

3. Place an espresso cup (your cup) on removable cup shelf. Make sure the coffee/

steam knob is on the .

4. Connect to power source, press down the ON/OFF button to the lower position

which is the ON position. The red indicator will be illuminated.

5. The appliance begins to be pre-heated until the green indicator is illuminated,

it shows the pre-heating is nished. Turning the coffee/steam knob to the

bposition, and water will ow out.

6. After about one minute, turn the coffee/steam knob to the.Drehen Sie den Kaffee-/

Dampfknopf nach ungefähr einer Minute zurück in die Position , position to stop

brewing, you can pour the water in container out then clean them thoroughly, now

you can start brewing.

Note: There may be noise when pumping the water on the rst time, it is normal, the

appliance is releasing the air in the appliance. After about 20s, the noise will disappear.

Pre-Heating

To make a cup of good hot Espresso coffee, we recommend you preheating the

appliance before making coffee, including the funnel, steel mesh and cup, so that the

coffee avour can not be inuenced by the cold parts.

1. Remove the detachable tank and open the tank

cover to ll it with desired water, the water level

should not exceed the “MAX” mark in the tank. Then

place t he tank into the appliance properly.

2. Set steel mesh into metal funnel, make sure the tube

on the funnel aligns with groove in the appliance,

then insert the funnel into the appliance from the

“Insert” position, and you can x them into coffee maker rmly through turn it

anticlockwise until it is at the lock position.(See g. 1)

3. Place an espresso cup (your cup) on removable cup shelf.

4. Then connect the appliance to power supply source. Make sure the coffee/steam

knob is on the  position.

5. Press the ON/OFF button to the lower position which is the ON position, the red

indicator will be illuminated.

6. When the green indicator is illuminated, you should turn the coffee/steam knob to

the

. position, there will be hot water owing out. After about one minute, close

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Passionata 20 - 10031702 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Passionata 20 - 10031702 Manual

Product: