Manual Klarstein Nagano M - 10033239 (page 24 of 64) (English, German, French, Italian, Spanish)

704766

Zoom out

Zoom in

1/64

TROUBLESHOOTING

Problem Possible Cause Possible Solution

Cooling does

not work, the

cooling system

on back of the

refrigerator is

cool.

a) The red point of the knob of

thermostat is set “0”.

a) Set the red point of the knob

of thermostat to the middle

position.

b) The power plug was not

plugged in.

b) Put the plug in.

c) There is no power in the

socket.

c) Check the power cord,

have the socket and power

lines checked by a qualied

technician, or use a different

socket.

d) There are problems with

electronic parts or sensors.

d) If necessary, have electronic

parts and sensors checked and

replaced by the manufacturer or

a qualied technician.

e) The heater does not function

properly or is damaged.

e) If necessary, have the

heater bar replaced by the

manufacturer or a qualied

technician.

Note on replacement:

Unplug the plug, lift the

insulated tube 30 to 40 mm

untill you see the clip for the

heater bar and loosen the

heater bar.

Put the insulated tube to

its original position after

replacement.

f) The refrigerator is at defrost. f) Read the instructions for

automatic defrosting in the

„Operation“ section of this

manual.

g) The refrigerator is not

positioned correctly.

g) Turn the refrigerator 90° to

the front.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Nagano M - 10033239 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Nagano M - 10033239 Manual

Product: