Manual Klarstein Monaco - 10021651 (page 14 of 42) (English, German, French, Italian, Spanish)

705846

Zoom out

Zoom in

1/42

Pressing the HUMIDITY button activates automatic mode (when the LED dis-

play starts to blink the word ‚Auto‘). You can select the desired humidity lev-

el by pressing HUMIDITY button repeatedly until the required humidity level is dis-

played (from 45% to 90% in increments of 5%). Once you select your desired humidity

level, simply stop pressing the button and you humidity level will be set. Wait another 5 seconds and

the numeric value on the LED display will switch to the current humidity level as measured by the

built-in Hygrostat. When the humidity level in the room reaches the set humidity level, the machine

will go into automatic sleep state and stop producing mist. When the rooms actual humidity level

drops below your set humidity level, then the machine will start producing mist again.

You can deactivate automatic mode very easily by pressing the setup button until you reach 90% RH.

Press the button one more time and you will now be in the manual mode. You will know that you are in the

manualmodebecausetheblinking‘Auto’Icondisappears.

Pressing ANION button will activate the anion generator and start sending healthy ions into the air,

itwillberepresentedbythetreeicon(#19)displayedontheLEDscreen.Longpresstoswitchon/o

night-light and power light.

Pressing the TIMER button to set the timer (when the LED display starts to blink the word

„Timer“)Thetimerfunctiondetermineshowmanyhoursthehumidierwilloperate.Youcansetthe

timer simply by pressing +I- once for each hour that you would like to run the unit. Many people

set the timer for 8-9 hours (during their sleep) but it can be set from 1 hour to 12 hours. When the

timer is set, the length of time is displayed in the middle of the LED display (#17). As time passes,

thetimevaluedecreasesuntilitgoesto00:00andthemachineshutso.

Once you have set the automatic humidity and the timer, the value of time remaining in timer. the

desired relative humidity and the actual relative humidity will displayed 40 seconds alternating in the

middle of LED display(#18)

Ifthehumidiershouldrunoutofwater,youwillhearabeepingsoundbeforethemachinewillau-

tomaticallyshuto.TheLEDscreenwilldisplaytheEmptyWaterTankicon(#16).

The bright LED display is designed to automatically dim alter 30 seconds of pressing any of the

LED panel buttons. The power light is also dimmed because the water tank is tinted. The result is a

soft blue glow. The light levels are bright enough to indicate that the machine is operating. yet low

enough to ensure a restful sleep in near darkness.

The SP8-807 is equipped with a Permanent Reusable White Dust & Anti-Microbial Filter. It

consists of an inner cylinder. an outer cover and a number of small plastic and ceramic balls. The

plastic balls are embedded with nano-silver, an anti-microbial agent designed to purify the water and

destroy microbes such as bacteria and mould. The ceramic balls function to soften the water by ad-

hering to minerals that cause white dust. They also serve to remove any unpleasant odour from the

water.Thelterrequirescleaningaboutonceamonthor1.000hoursofuse.Seethemaintenance

section of more information.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Monaco - 10021651 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Monaco - 10021651 Manual

Product: