705030
48
Zoom out
Zoom in
Previous page
1/80
Next page
48
EN
INSTALLATION
Important information about installation
This appliance is NOT intended for use in a commercial environment.
Please observe the installation instructions provided and note that this appliance
should only be installed by a quali ed technician.
Please observe the installation instructions provided and note that this appliance
should only be installed by a quali ed technician.
The appliance is tted with a plug and must only be connected to a properly
installed earthed socket.
In case a new socket is needed, installation and cable connection must only be
done by a quali ed electrician. If the plug is no longer accessible following
installation, a pole disconnecting device must be present on the installation site with
a contact gap of at least 3 mm.
Adapters, multiway strips and extension cords must not be used. Overloading can
result in re.
If the appliance is not tted with a supply cord and a plug, the connection
equipment must have a contact separation in all poles that provide full
disconnection, and the appliance must be incorporated in the xed wiring in
accordance with the wiring rules.
The accessible surface may be hot during operation.
Fitted units
This appliance is only intended to be fully tted in a kitchen.
This appliance is not designed to be used as a tabletop appliance or inside a
cupboard.
The tted cabinet must not have a back wall behind the appliance.
A gap of at least 45 mm must be maintained between the wall and the base or
back panel of the unit above.
The tted cabinet must have a ventilation opening of 250 cm2 on the front. To
achieve this, cut back the base panel or t a ventilation grille.
Ventilation slots and intakes must not be covered.
The safe operation of this appliance can only be guaranteed if it has been installed
in accordance with these installation instructions.
The tter is liable for any damage resulting from incorrect installation.
The units into which the appliance is tted must be heat-resistant up to 90 °C.
Electrical connection
The appliance is tted with a plug and must only be connected to a properly installed
earthed socket. Only a qualied electrician who takes the approriate regulations
into account may install the socket or replace the connecting cable. If the plug is no
longer accessible following installation, an all-pole isolating switch must be present on
the installation side with a contact gap of at least 3 mm. Contact protection must be
ensured by the installation.
Fuse protection: see instructions for use-technical data.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Luminance Steam - 10032639 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Luminance Steam - 10032639 in the language / languages: English, German as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info