670290
12
Zoom out
Zoom in
Previous page
1/31
Next page
12
Blade Assembly Removal
IMPORTANT: Do not remove blade assembly unless absolutely necessary!
To removal the blade assembly, rotate the Jar collar carefully counter-clockwise as shown in the following
figure.
Carefully removal the blade assembly by placing a thick cloth over the blade assembly and pulling straight out.
Hint: place jar on a flat surface to facilitate removal.
Use caution when handling the blades, they are very sharp.
The way to removal the smoothie cup same like this.
Blade Assembly Replaycement
When inserting the sealing and the blade assembly into the jar bottom, align the flat sides of the blade
assembly with the flat sides of the jar opening.
Insert the Jar collar first , then hand tighten and turn clockwise until tight.
The way to replace the smoothie cup same like this.
Note : if the blade assembly is not tight enough , you will notice increased.
Blade Assembly Cleaning
Wash on the blade assembly up surface in soapy water . Do not soak or use abrasive
cleaners. If necessary, scrub lightly with a soft bristle brush to removal any residue
left on the blades or nut.
Rinse the blade assembly up surface under running water. Dry thoroughly with a
clean cloth (do not wash the bottom in water or any other liquid). Do not place the
blade assembly in the dishwasher.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Lambada 10030085 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Lambada 10030085 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info