670351
99
Zoom out
Zoom in
Previous page
1/125
Next page
9
BIIS 1200 SYSTEM OPERATION
9-8
Receiving a call
D Receiving an Individual call
When an Individual call is received:
The Status indicator lights green�
” may be displayed or blink, depending on the
presetting�
” is displayed and the mute is released�
The calling station name (or ID) is displayed while
receiving the signal�
Station 10
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�
3� After the communication is finished, push [Back]
to send a Clear Down signal to terminate the
connection�
“CLR DOWN” is displayed�
” disappears�
L Either station can send a Clear Down signal�
D Receiving a Group call
When a Group call is received:
The Status indicator lights green�
” may be displayed or blink, depending on the
presetting�
” is displayed and the mute is released�
The Group name (or ID) is displayed while receiving
the signal�
Group C
Call Scan
1� Hold down [PTT] to speak�
NOTE: Only one station can speak at a time�
2� Release [PTT] to receive�
3� After the communication is finished, push [Back]
to send a Clear Down signal to terminate the
connection�
“CLR DOWN” is displayed�
” disappears�
L Any station can send a Clear Down signal�
D Receiving a Status Message
When a Status Message is received:
Beeps sound�
” blinks�
May vibrate, depending on the presetting�
The Status Message and the calling station or Group
name (or ID) are alternately displayed�
RX Status 01
Call Scan
Push [Back] to stop the display indication�
D Receiving a Message
When a Message is received:
Beeps sound�
The Message and the calling station or Group name
(or ID) are alternately displayed�
” blinks�
May vibrate, depending on the presetting�
Go to Area 1
Call Scan
Push [Back] to stop the display indication�
D Receiving an Emergency call
When an Emergency call is received:
Beeps sound�
The Emergency text and the calling station name (or
ID) are alternately displayed�
” blinks�
May vibrate, depending on the presetting�
Emergency
Call Scan
1� Hold down [PTT] to speak�
2� To stop the beep and display indication, turn OFF
the transceiver, change the channel, or push
[PTT] or a key
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein IC-F52D NXDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein IC-F52D NXDN in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info