Manual Klarstein Gusteau 10033189 (page 53 of 192) (English, German, French, Italian, Spanish)

756007

Zoom out

Zoom in

1/192

Before rst use

• To remove the new cooker smell, heat up the oven when it is empty and closed. An

hour of top/bottom heating at 250°C is ideal for this purpose.

• Ensure that no packaging remnants have been left in the cooking compartment.

• Ensure the room the oven is installed in is well ventilated by opening doors and

windows during this process.

1. Use the function selector to set top/bottom heating.

2. Set the temperature selector to 250°C. After 1hour, switch off the oven. To do so,

turn the function selector to the off position.

3. Before you use the accessories for the rst time, clean them thoroughly with hot

soapy water and a soft dish cloth.

Power on

• Connect your appliance to the mains supply.

• All indicator lights of the display board will light up for 1sec and then remind the

user to input the time.

• Default time indicates 12:00, the hour 12 will ash, the time can be input at this

stage (refer to the „Setting the clock“ section for more details).

• After 10 sec without any operation and the display will change to adjust minute.

• Within 10 sec without any operation when adjusting the minutes, the oven will enter

standby mode automatically.

• Under standby mode, if there is no any operation in 5 minutes, the oven will switch

off automatically, and the display screen extinguishes.

• When the oven is switched off, you can change to standby mode by means of key

or programming switch (KB1).

• The standby mode displays the system time and the clock icon (9). (Refer to the

picture below for the display effect.)

Initial standby mode

• When oven is powered on, the oven door lock will start to self-inspection. During

the self-examination, the door lock will run back and forth automatically.

• If there is no abnormal alarm within 20 seconds, then self-inspection is completed.

Or if it shows fault code “E-3“ during the self-inspection, please refer to protection

function for problem analysis (see section „Protection function“ in chapter

“Operating functions“). You can touch the pause/cancel button (K4) to cancel the

fault code and return to standby mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Gusteau 10033189 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Gusteau 10033189 Manual

Product: