Manual Klarstein GL90WSB - 10026367 (page 26 of 104) (English, German, French, Italian, Spanish)

754165

Zoom out

Zoom in

1/104



1. The distance between the cooking surface and the lowest edge of the cooker

hood must be at least 65 cm (see picture 1).

2. Once the height is dened, install the anchoring in the appropriate place. To

do this, you must rst drill holes (you will need a drill, suitable drill bits, dowels

and screws) and then x the anchorage to the wall with the screws. After the

anchoring is xed, use the similar procedure to attach the internal clamp for

the replace facing (see Figure 2). Please pay attention to the correct distance

(please measure the distance), because the replace facing will be xed to the

bracket later.

3. Please x the outside clamp for the replace facing to the outside of the facing

and check if the inside replace facing is free to move in height. Next, install

the pipe connection and the chimney facing on the hood. Refer to Figure 3.

4. Place the hood on the anchorage (see Figure 4). 5.

5. Set the correct height of the inner chimney facing so that the brackets match

and x them. After that you can x the hood with the safety screws(see picture

5).

Note: Please note that the two safety caps are located on the back of the casing.

1 2

Inside chimney bracket

Hook

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein GL90WSB - 10026367 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein GL90WSB - 10026367 Manual

Product: