705334
17
Zoom out
Zoom in
Previous page
1/31
Next page
17
SET:
Press “SET” button first and then press arrow buttons, the shining spot on the
screen of the remote control will switch among hour, minute & weekday (as shown
on Pic 2). Press arrow buttons to change the parameter to a idea time that you want
the machine work. During pre-setting, when the shining happens to 1-7 press „OK“
button; the presently shining spot will have a “beam” shining or extinguished; the
weekday with the “beam” shining is the present pre-setting. Press „ALL“ button to
switch between selection of all or no selection of all.
During the setting, press the power button to quit; press the “SET” button to save the present setting.
FULL GO:
Press the “SET” button, the screen shows a shinning spot , then press the “STOP” button, you can see „FF60“
displaying with the first F flashing, press again the “SET” to stop flashing which indicates FULL GO function is
activated, so the machine can automatically clean when has been fully charged. To cancel the FULL GO func-
tion, first press the SET button to see „FF60“ displaying on the screen with the first “F” flashing,then press
STOP and after you press the SET button again, the FULL GO function is canceled.
Space Isolator
1 Signal transmitting
2 Power indicator
3 On/Off switch
4 Code check button
Note: You should check code before using the Space Isolator; otherwise it will fail to work.
Steps of code check
A: Turn off the cleaner, and turn on the Space Isolator (with power indicator on);
B: Keep holding the code check button on the Space Isolator;(Tip: the code check button is inside the hole, you
need to use auxiliary tools when hold the button)
C: Turn on the cleaner;
D: After the cleaner toots 2 or 3 times, release the code check button, then the code check set is finished
successfully.
E: If you fail to hear toot 2 or 3 times, twice during the code check, just repeat the above process.
Note: Place the space isolator against the wall, or it might be easily moved by the cleaner from side or back of
the space isolator, which would cause the machine cleans the confined area.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Cleanhero - 10028521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Cleanhero - 10028521 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info