754061
18
Zoom out
Zoom in
Previous page
1/56
Next page
18
EN
COMMISSIONING
Before rst use
Remove all packing material. Allow the appliance to stand upright for at least 4 hours
before plugging the power plug into the wall socket. This reduces the possibility of
malfunction due to improper handling during transport. Clean the internal surfaces with
lukewarm water and a soft cloth.
Before switching on
Make sure that the machine is installed by a qualied person, following the
operating instructions.
After installing the machine, wait four hours before plugging the power plug into
the wall outlet. This will allow the refrigerant to be completely redistributed in the
refrigerant circuit.
Before using the machine for the rst time, clean the exterior of the machine and the
removable accessories with a mild soap solution and water.
Clean the inside of the appliance with a solution of sodium bicarbonate and water.
After cleaning, dry the inside of the appliance and the accessories properly.
When you turn on the machine for the rst time, a strange smell may appear. This is
normal and the smell disappears as soon as the unit starts to cool down.
During rst use
Note: When you use the unit for the rst time or switch it on again after a long period,
there may be a difference of a few degrees between the temperature you set and the
temperature displayed on the screen. This is normal. If the unit has been switched on
for a few hours, the temperature will adjust.
The rst time you switch on the unit, the compressor of the unit runs continuously until
the unit has cooled down.
The appliance door should be opened as little as possible during the cooling down
process.
If the unit has been switched off or the mains plug has been removed from the
socket, you should wait at least 5 minutes before switching it on again or plugging
the mains plug back into the socket.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Bellevin 6 Uno 10035858 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Bellevin 6 Uno 10035858 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info