704783
19
Zoom out
Zoom in
Previous page
1/64
Next page
19
EN
GETTING STARTED
Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the rst time (or restart the wine cellar after having it
shut off for a long time), there will be a few degrees variance between the temperature
you have selected and the one indicated on the LED readout. This is normal and it is
due to the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Note: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before
restarting the unit. The wine cellar will not start if you attempt to restart before this
time delay.
Operating Noises
To reach the desired temperature settings, wine cellars, like all wine cellars operating
with compressors and fans, may produce the following types of noises. These noises are
normal and may occur as follows:
Gurgling sound - caused by the refrigerant owing through the appliance’s coils.
Cracking/popping sounds - resulting from the contraction and expansion of the
refrigerant gas to produce cold.
Fan operating sound - to circulate the air within the wine cellar.
Loading the Wine Cellar
You may load your wine bottles in single or double rows while taking note of the following:
if you do not have enough bottles to ll your wine cellar, it is better to distribute the load
throughout the wine cellar so as to avoid “all on top” or “all below” type loads.
Do remove or relocate adjustable wooden shelves to accommodate larger type
of bottles or increase the capacity of the cellar by stacking the bottles up when
necessary. (See removing shelves)
Keep smalls gap between the walls and the bottles to allow air circulation. Like an
underground cellar air circulation is important to prevent mould and for a better
homogeneous temperature within the cellar.
Do not over load your wine cellar to facilitate air circulation.
Avoid obstructing the internal fans (located inside on the back panel of the wine cellar).
Do not slide the shelves outwards beyond the xed position to prevent the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the wine cellar
to tilt forward.
Do not cover the wooden shelves with alloy foil or other materials, as it will obstruct
air circulation.
Do not move your wine cellar while it is loaded with wines. This might distort the
body of the wine cellar and cause back injury.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Barossa 77 Duo - 10032963 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Barossa 77 Duo - 10032963 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info