704223
32
Zoom out
Zoom in
Previous page
1/92
Next page
32
EN
Inserting of the Milk Tank
To insert the milk tank into the compartment, place the upper part of the milk tank (9) on
the lower part of the tank (7).
Insert the milk tank into the compartment. Make sure that the milk tube directs to the
tube recess of the compartment. I once to indicate when the milk tank f the tank was not
inserted properly the device will not operate.
NOTE: The device will beep once to indicate if the milk tank is not positioned correctly.
Reposition it or check if the magnetic cover is missing.
Attach the milk spout to the frothing chamber. Direct the outlet of the spout towards the
drip plate or to the centre of the cup respectively to avoid accidental burns from hot
liquids.
Filling of the Milk Tank
Fill the milk tank with milk. Make sure that the quantity lled in is between the marks MIN
and MAX inside the milk tank.
Place the milk tank into the device. Make sure that it has been inserted correctly.
Filling the Water Tank
Fill the water tank with cold water. Make sure that the quantity lled in is between the
marks MIN and MAX inside the water tank.
Close the top lid. You will hear a click sound when closed properly.
Heating
Make sure that the water and milk tank are lled with the amount of liquid needed for
your intended operation.
Place a mug or coffee cup on the cup holder.
NOTE: You can adjust the cup holder to tall and short cups. Adjust the cup holder as
described in the chapter FUNCTIONS AND FEATURES. Align the milk spout to the
angle of the cup for proper operation and to avoid accidental burns by hot liquid.
Connect the device to a power outlet and press the button POWER.
The device will start pumping water for 3 seconds.
The POWER indicator will start to ash and the device will start to heat.
When the POWER indicator stops to ash the water has reached the appropriate
temperature for brewing hot beverages. The device is ready to start brewing.
Now your device is ready for use!
Now make preparations for the program you intend to use for brewing as described in
PROGRAMS.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Baristomat 2-in-1 - 10033138 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Baristomat 2-in-1 - 10033138 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info