Manual Klarstein 10035176 (page 36 of 104) (English, German, French, Italian, Spanish)

753755

Zoom out

Zoom in

1/104

TEMPERATURE SETTING

Note: The display shows the actual temperature and humidity inside the device.

The temperature setting is factory set and can be adjusted individually. In the event of

a power failure, all of the temperature settings you have made will be deleted and

the factory settings will be restored. The control panel of each model has a reminder

function.

Note: There is a difference between the temperature inside the device and the

temperature that is displayed on the screen: It will take about 12 hours before you

notice the effects of the temperature adjustment when the device is full.

Once the temperature has been set, you should not change it if possible. The thermostat

keeps the temperature constant with deviations of +/- 2 ° C. However, the thermal

inertia of the steak dry ager and the glass is so great that within this temperature range

the actual temperature of the steak dry ager only uctuates by 0.5 ° C to 1 ° C.

Defrost function

The device features an integrated defrost function. When the compressor is stopped, the

device will defrost automatically. The defrost water is automatically drained from the

storage area of the device. The water that condenses in the container is converted into

heat or steam by the compressor in order to maintain the humidity in the storage area.

All devices are equipped with a double-layered E-glass door, which has a third inner

acrylic layer to minimise condensation on the glass door.

The device is not completely sealed. Fresh air can get in through the drain pipe.

Note: During the cooling cycle, heat will be given off which escapes through the

outer surfaces of the device. Avoid touching these surfaces during the cooling cycle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10035176 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10035176 Manual

Product: