Manual Klarstein 10035176 (page 26 of 104) (English, German, French, Italian, Spanish)

753755

Zoom out

Zoom in

1/104

INSTALLATION

Before rst use

Let the device stand for 24 hours before the rst use so that the coolant can spread.

During this time, leave the door open so that production-related odours can evaporate.

Note: All models without front ventilation or ventilation slots on the front are not built-

in devices and must be free-standing.

Location

The location where you place the device should:

• be sturdy and well ventilated.

• be far away from direct sunlight or other heat sources.

• not be too wet, such as a bathroom or washroom.

• have a level oor.

• have a standardised electrical connection.

• have a socket with surge protection.

• be far away from microwaves, as their interference could have a negative impact

on the device.

Furthermore, the ambient temperature in the room should not be very cold or very warm.

Cold and warmth may have a negative effect on the function, so that the desired internal

temperature will not be reached.

Setup

• Remove all packaging material from and around the steak dry ager.

• Set up the steak dry ager so that the plug is accessible at all times. Unplug the

power cord and put the device in its nal location. Set it up so that the compressor is

free and has no contact with other objects or walls.

• Compensate for any slight oor unevenness before lling the device. Use the

adjustable feet for this. To do this, turn the rear feet completely inwards and

compensate for the incline with the two front feet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10035176 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10035176 Manual

Product: