Manual Klarstein 10035042 (page 24 of 84) (English, German, French, Italian, Spanish)

770480

Zoom out

Zoom in

1/84

FUNCTIONS AND SETTINGS

Main switch (A)

Open the cover on the bottom of the unit and press button A down to the ON position.

On / Off button (B)

Press the on / off button to start the ame effect. The following will appear on the

display:

• The heating symbol will be displayed and the appliance will

start to heat if the room temperature is below the standard

setting (10 ° C). If the temperature is higher than 10 ° C, the

icon will not be displayed and the unit will not heat up.

• The clock symbol will ash to indicate that no timer has

yet been set. Follow the steps described in the „Operating

Modes“ section under „Timer Mode“ to set the timer.

When the unit is switched on, two short beeps will sound, increasing in tone. When it is

switched off, three beeps will sound, which will decrease in tone. When switching on,

the heating level, the setpoint temperature and the clock symbol will be displayed. The

display disappears after 60 seconds unless you press a key. Press any key to return to

the display.

Key lock (C)

Press and hold the OK button for more than 6 seconds to lock or

unlock the keys. As soon as the keys are locked, [LOC] ashes

on the display for 6 seconds and then disappears. Press any key

and [LOC] will ash again. Press the OK button for 6 seconds to

unlock the keys.

Note: The On / Off button (B) is never locked.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10035042 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10035042 Manual

Product: