778058
22
Zoom out
Zoom in
Previous page
1/84
Next page
22
EN
INSTALLATION
Installation Notes
Warning: Danger of re
Do not install the appliance close to curtains and other
combustible materials.
This heater must be installed by a qualied person, that is, a qualied electrician.
Before installation and during installation, ensure that the heater is always discon-
nected from the power supply and is in a cool state.
The heater can be installed horizontally or vertically.
When installing the wall and ceiling machine, the minimum point of the heater must
be higher than 1.8 meters from the ground, ensuring that the heater can not be
touched directly during operation.
When installing in a horizontal or ceiling, do not place the heater at an angle of
more than 90 degrees, or below 45 degrees.
If the heater installation angle is vertical or close to vertical, make sure the power
cord is always under the heater.
During the use of the heater, there is a certain increase in the temperature of the
heater body. Make sure that the power cord never touches the heater body and is
away from the heater housing.
Do not install heaters on the surface of any ammable materials.
When installing the heater, make sure that the distance between the heater and the
surface of the ammable material is always not less than the minimum safe distance.
Make sure the heater is always at least 0.5 m wide from the ceiling and adjacent
walls.
If you want to use the heater outdoors, use a weatherproof, qualied outlet.
Make sure there are no wires or water pipes in the area where the heater is installed
before drilling.
The heater must be installed on the mounting bracket provided by the manufacturer
(see Figure A).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10034761 Smartwave at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10034761 Smartwave in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info