753554
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
EN
Operation
1Open the lid, remove the transparent tank and add water. Replace the tank and
replace the lid.
Note: There is a water outlet hole above the water tank. The lled water
should not exceed this position. If more water is added, the excess water
will drain off automatically.
2Connect the power, the screen lights up and the appliance is in standby mode.
3Select the size of the ice you want to produce. Large ice cubes (L) are set by
default.
4Press Start/Stop to start the machine and start making ice cubes.
Important Notes
The water poured into water reservoir should be lower than the water reservoir’s
MAX position. When water volume goes beyond the max, please open the bottom
water drain plug to drain the spare water out. Then close the transparent lid.
Please select the small ice when ambient temperature is below 20°C. When the
ambient temperature is higher than 25°C, Large ice cube sizes are recommended.
When the ice basket is full please remove the ice immediately, Do not allow the ice
Basket to overll. When the ice basket is full enough, you can take out the up water
box, and take out a part of ice, you can take out the ice basket.
Before making ice, do put the ice basket in the ice maker.
CLEANING AND CARE
Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator
frequently. When cleaning, unplug the unit and remove the ice cubes. Use a diluted
solution of water and vinegar to clean the inside and the outside surface of the
Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids,
gasoline or oil. Rinse thoroughly before starting.
Keep ventilation openings in the appliance enclosure, or in the built-in structure,
clear of obstruction. Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.
To ensure the cleanness of ice, please change water for water reservoir at least once
one day. If do not use for a long time, please drain the water out and clean it up.
If the compressor takes a strike action for shortage water, fully water or interruption
of power supply, it will delay for 3mins to start up after restarted.
Always use fresh water before starting ice production either at initial installation or
after a long shut-off period.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10034515 Kristall XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10034515 Kristall XL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info