Manual Klarstein 10034486 Studio 1 (page 21 of 64) (English, German, French, Italian, Spanish)

770497

Zoom out

Zoom in

1/64

Installation

1. The re is designed to be permanently xed to o woll ot a minimum height of 300

mm. The wall bracket must be tted horizontally and the cable routed to the bottom

right of the re. A height of 600 mm from the Aoor to the bottom of the wall re is

recommended for optimum viewing of the fuel bed.

2. Use the bracket as a table template and mark ve drill positions on the wall. Ensure

that these holes are all level.

􀁟

3. Put the bracket aside and drill

holes with a depth 35 mm

using a 2 mm pilot drill bit &

8mm drill bit.

4. Clean the holes from dust and

debris and insert one plug

in each hole. Make sure the

edge of each hole is Aush

with the surface.

5. Hold the bracket in position

and x it in place with screws.

6. Carefully lilt the appliance

up, ensuring that the top rear

ledge of wall re engages

with the wall bracket and is

sitting centrally. This process

should be carried out by two

people to avoid injury or

damage to property or the

appliance.

7. Do not let go of the appliance until you are sure it is safely attached to the bracket.

Gently bring the wall re down against the wall. Mark the lower xing brackets two

xing hole positions on the wall, then remove the wall re.

8. Drill the wall and insert the wall plugs.

9. Ret the wall re to the wall and fasten the bottom xing bracket to the wall using

the screws provided to permanently x the wall re in place.

10. Remove the front panel and unpack the logs from the bag and place them along the

light unit in the desired position.

11. Put the front panel back in place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10034486 Studio 1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10034486 Studio 1 Manual

Product: