776418
19
Zoom out
Zoom in
Previous page
1/54
Next page
19
EN
3. Pull the garment which is to be
pressed over the nylon balloon
and the hanger (1) and do up the
buttons if necessary. Make sure that
the collar is tted over the
collar section (9) on the
hanger (1),
any button strip is over the hole
line on the nylon balloon,
the arms of the nylon balloon
t properly in the sleeves of the
garment and are not twisted or
scrunched up,
all buttons on the garment
(including on the sleeves) are
done up.
4. Spread the clamps along the bottom of the garment (at the front and back in each
case on the outsides and in the middle on the button strip at the front) so that it is
weighed down and will not go out of shape when the nylon balloon is inated.
5. Insert the mains plug into an easily accessible socket.
6. Use the Minus and Plus buttons (6/7) to set the timer to the desired duration. You
can make the following selection: 15 min, 30 min, 60 min, 90 min, 130 min and
180 min.
7. Once the nylon balloon has inated, straighten out the garment and smooth it down
again.
8. When the set time elapses, the appliance switches off automatically.
9. Remove the garment from the nylon balloon and hanger (1).
10. Pull the mains plug out of the plug socket and allow the appliance to cool down
completely.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10034446 SHIRT BUTLER PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10034446 SHIRT BUTLER PRO in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info