753559
19
Zoom out
Zoom in
Previous page
1/66
Next page
19
EN
Device Components
1 Transparent window 7 Operation panel
2 Upper cover 8Air outlet
3 Evaporator 9 Water inlet
4 Float switch 10 Air inlet
5 Ice detection plate 11 Power cable
6 Storage for ice cubes / water tank 12 Water outlet (bottom)
INSTALLATION
Select installation location
1. Place the appliance on a stable and at surface.
2. Keep the appliance away from heat sources and direct sunlight, to avoid affecting
the ice-making performance.
3. Keep the appliance in a well-ventilated place, leave at least 20cm space near the
wind inlet and outlet of ice maker’s heat dissipation.
4. Do not use the appliance when placed in too cold or too hot environment. If the
environment temperature is lower than 10 °C or over 43 °C, the machine will have
problems with making ice.
5. Do not use outdoors.
Preparation
1. Remove all packaging components.
2. Check whether the appliance and the accessories included are complete.
3. Put the appliance on a proper position.
4. Clean the appliance before use.
OPERATION
1. After moving the appliance, allow it to stand for 30 minutes, before turning it on.
Then plug the appliance in.
2. Pour water into the water tank or connect the water tap to the water inlet of the ice
cube machine (connect the water inlet only to water outlets with drinking water
quality).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10033774 Clearcube LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10033774 Clearcube LCD in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info