778206
29
Zoom out
Zoom in
Previous page
1/68
Next page
29
EN
Problems Possible cause Prevention/ Solution
Burner will not light
using ignitor.
Electrical issues
1. Electrode cracked
or broken;” sparks at
crack.”
2. Electrode tip not in
proper position
3. Wire and/or
electrode covered with
cooking residue.
4. Wires are loose or
disconnected
5. Wires are shorting
(sparking) between
igitor and electrode.
6. push button sticks
at bottom sparking
between ignitor and
electrode.
1.Replace electrode.
2.Tip of electrode should be
pointing toward port hole in
burner. The distance should
be 1/8” to 3/16”. Adjust if
necessary.
3.Clean wire and or electrode
with rubbing alcohol and clean
swab.
4.Reconnect wires or replace
electrode/wire assembly.
5.Replace ignitor wire
6.Replace ignitor
7.Inspect wire insulation and
proper connection. Replace wires
if insulation is broken.
Burner will not mach
light.
1. See ”gas issues;” on
previous page.
2. Improper method of
match-lighting.
1. See “Pilot Gas Control Ignition”
section of use and care.
Sudden drop in gas
ow or low ame.
1. Grease buildup.
2. Excessive fat in
meat.
3. Excessive cooking
temperature
1. Clean burners and inside of
grill/ rebox
2. Trim fat from meat before
grilling.
Flames blow out. High or gusting winds.
Low on LP gas.
Excess ow valve
tripped.
Turn front of grill to face wind or
increase ame height.
Rell LP tank.
Refer to “sudden drop in gas
ow” above.
Persistent grease re. Grease trapped by
food buildup around
burner system.
Turn knobs to OFF. Turn gas off at
LP tank. Leave lid in position and
let re burn out. After grill cools,
remove and clean all parts.
Flashback…
(re in burner tube(s)
Burner and burner
tubes are blocked.
Turn knobs to OFF. clean burner
and/or burner tubes. See burner
cleaning section of use and care
manual.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10033297 PARFORCE DUO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10033297 PARFORCE DUO in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info