778399

Klarstein 10032807 Manual

17
Zoom out
Zoom in
Previous page
1/52
Next page
17
EN
Important: Clean the
milk frothing system
after each use to avoid
any milk residue. User
can simply wash the
milk tank and clean the
tube under tap water,
then ll in the milk tank
with clean water and
press clean button.
• Put on the milk tank cover, insert the milk tank assembly into the correct position.
Adjust the angle of milk foam spout to the right place by using the milk frothing
lever. This machine enables the user to adjust the foam ratio by rotating the knob
from Max to Min to enjoy the desired foam.
• Place single cup lter insert in sieve holder.
• Fill the lter with ne ground espresso coffee, press the coffee powder down into
the lter, using the at end of the measuring spoon to help.
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the cappuccino button.
• The button will be illuminated white and the unit will start working. The pump will
work intermittently to pump the water and the milk foam will come out to your cup
rst. After the milk foam nished, the unit starts to brew the coffee into the cup.
• The cappuccino brewing cycle will complete once the unit beeps once.
(4) Latte Brewing
• To detach the milk tank assembly, carefully hold the milk tank by one hand, and
press the button on right side of milk tank cover by another hand to remove the milk
tank assembly, gently move out the milk tank assembly to the side at the same time.
• Remove the milk tank cover by pressing the release button on the side of the milk
tank cover, ipping it up to one side and taking it off.
• Add the milk into the milk tank. Always ll the milk beneath the max mark. The
suggested temperature for milk is 4-8 °C.
• Put on the milk tank cover, insert the milk tank assembly into the correct position.
Adjust the angle of milk foam spout to the right place by using the milk frothing
lever. This machine enables the user to adjust the foam ration by rotating the knob
the Max to Min to enjoy the desired foam.
• Place one single cup lter insert in sieve holder.
• Fill the lter with ne ground espresso coffee, press the coffee powder down into
the lter, using the at end of the measuring spoon to help.
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the latte button.
• The button will be illuminated white and the unit will start working. The pump will
work intermittently to pump the water and the milk foam will come out to your cup
rst. After the milk foam nished, the unit starts to brew the coffee into the cup.
• The latte brewing cycle will complete once the unit beeps once.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10032807 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10032807 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info