Manual Klarstein 10032536 COLMAR (page 25 of 76) (English, German, French, Italian, Spanish)

770515

Zoom out

Zoom in

1/76

Timer starting and timer shutdown

While setting the timer, the setting time is displayed, and the timer is used in combination

with serial number setting.

E.g. Means the starting time of setting 5 is 23:40.

E.g. means the shutdown time of setting 5 is 6:10.

Flame brightness

It displays the current brightness of the ame, which ranges from one to ve positions.

OPERATION AND SETTINGS

Boot steps

1 Connect the power.

2 Turn on the power switch.

3 Press the control switch or „ON/OFF“ key of the remote controller to start up

4 Press the 1000W/2000W button once for the low heat setting 1000W; press

twice for the high heat setting 2000W; press three to switch off the heat setting.

5 Press the DIMMER button to operate the dimmer mode, repeat pressing will raise

and lower the brightness.

6 Press the BACK LIGHT button to adjust the colors of LED decoration, 7 colors

available.

Adaptive start control function

Press „IC“ button on the remote controller to start or close the adaptive start control

function. When turned on this function, the replace can automatically change the

heating mode, and this is depend on the setting temperature and the room temperature.

When the timer is on, it is possible to start the heating ahead of the schedule.

Note: Adaptive start control function is only working when the week timer systerm is

power on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10032536 COLMAR in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10032536 COLMAR Manual

Product: