Manual Klarstein 10032536 COLMAR (page 22 of 76) (English, German, French, Italian, Spanish)

770515

Zoom out

Zoom in

1/76

Figure 3: Mark the lower xing bracket

two xing hole positions on the wall-see

Fig.3, remove the heater. Drill the wall

and insert the wall plugs. Ret the heater

to the wall and fasten the bottom xing

bracket to the wall using the screws

provided to permanently x the heater

in place.

Figure 4: Place the front surround over

the front of the re aligning the slots in the

brackets at each side of the front panel

with the lugs on the sides of the re-see

Fig.4. Again two people will be required

for this operation.

Mounting the Fireplace Stand

It is possible to install the electric replace on a surface, instead mounting it on the wall.

• Remove the tempered glass from the metal body.

• Place the metal body horizontally on a table.

• In the lower part of the body there are some holes; align them to the holes on the

replace stand.

• Use the supplied screws to secure the base to the lower side of the main body.

• Place the unit on a at and stable surface.

• With some help, install the tempered glass.

• Align the lateral hooks of the glass with the notches on the sides of the metal body.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10032536 COLMAR in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10032536 COLMAR Manual

Product: