Manual Klarstein 10032336 (page 16 of 44) (English, German, French, Italian, Spanish)

727537

Zoom out

Zoom in

1/44

SLEEP Mode

The “Sleep Wind“ allows you to set the product so that the speed will decrease

gradually from a high speed to low (depending on the original fan speed selected by

the user). The preset programming for each setting is as follows:

• If it is selected HIGH, the unit will work under HIGH NORMAL wind mode for half

an hour, then revert to work under MID NORMAL wind mode for half an hour and

then revert to LOW NORMAL wind mode.

• If it is selected MID, the unit will work under MID NORMAL wind mode for half an

hour and then revert to LOW NORMAL wind mode.

• If it is selected LOW, the unit will work under LOW NORMAL wind mode.

OSC Function

Press the “OSC” button, the vertical blades will swing automatically back and forth, and

the swing symbol LED light will light up; press the button again to switch off this function.

The horizontal blades can be adjusted by hand.

Timer Function

Press the “TIMER” button to limit the ON time from 1-8 hours. The LED display will light

up the digital.

Note: All the above mentioned modes and functions can be set using the supplied

remote control, the remote control requires one battery CR2032 (included). Make

sure the poles are not reversed when you insert the batteries.

COOL Function

Press the COOL button to start the pump. Press the button again to stop the pump. If the

sensor detects a lack of water, it briey stops the pump and then restarts it to eliminate

sensor failure. If he continues to register a lack of water, he stops the pump, an alarm

sounds and the COOL indicator goes off.

Drying Function

Press the “TIMER” button 3seconds, start to lter air drying, the pump stops working, it

works on HIGH speed for 20 minutes to stop working. When the lter drying, there is

only “ON/OFF” button can operate, others are invalid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10032336 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10032336 Manual

Product: