778442

Klarstein 10031628 Manual

28
Zoom out
Zoom in
Previous page
1/72
Next page
28
EN
TROUBLESHOOTING
Nothing happens when I try to vacuum package
• Check power cord to see if it is rmly plugged into electrical outlet.
• Examine power cord for any damages.
• See if electrical outlet is operative by plugging in another appliance.
• If your appliance has a mode switch, make sure it is set to the correct mode. Refer to
the above operating instructions
• Make sure bag is placed correctly inside Vacuum chamber and beneath the air
intake.
Air is not removed from the bag completely
• To seal properly, open end of bag should be resting entirely inside vacuum
chamber area.
• Check sealing strip and the foam gasket beneath the lid for debris and position.
Make sure no breaking or distortion of the foam seal gaskets on both the cover and
on the base around the vacuum chamber. Wipe clean and smooth them back into
place.
• Vacuum bag may have a leak. To test, seal the bag with some air in it, submerge in
water, and apply pressure. Bubbles indicate a leak. Reseal or use another bag.
• Uses only the specic vacuum bag with vacuum channels provided by the
manufacturer.
• Leaks along the seal which can be caused by wrinkles, debris crumbs, grease or
liquids. Reopen bag, wipe the top inside of the bag and smooth it out along the
sealing strip before resealing.
The machine does not turn to seal after vacuuming
• There is a vacuum pressure sensor built in this machine. The machine will not turn to
seal automatically if the vacuum pressure inside the bag is not able to reach to the
predetermined vacuum pressure. Check sealing strip and the foam gasket beneath
the lid for debris and correct position. Wipe clean and smooth them back into
place, and try again.
• Make sure no breaking or distortion of the foam seal gaskets on both the cover and
on the base around the vacuum chamber. Take it out from the groove, wash and dry
it thoroughly; or replace with a new foam gasket (get it from where you brought or
your nearest service center).
• Vacuum bag may have a leak. To test, seal the bag with some air in it, submerge in
water, and apply pressure. Bubbles indicate a leak. reseal or use another bag.
• Leaks along the seal which can be caused by wrinkles, debris crumbs, grease or
liquids from the bag. Reopen bag, wipe the top inside of the bag and smooth it out
along the sealing strip before resealing.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10031628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10031628 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info