Manual Klarstein 10030848 Ice Volcano 2G (page 21 of 88) (Dutch)

753543

Zoom out

Zoom in

1/88

3. Press “ON/OFF” button on the control panel to begin the ice making cycle. After

this, the symbol will change to light on always in LCD display window, and

symbol will ash on in the mean time. The default size of ice-cube is Large. If

you want to select the size of the ice cube, just press the “SELECT” button to select

between Large size and Small size . If you still think the ice cube size is not

t for you, you can add the each ice-making cycle time by “SELECT” button. During

the unit ice-making running, always press the “ON/OFF” button for more than

5 seconds, digit “0” will appear in the TIMER delay time displaying area of LCD

window, which means the standard time of the once ice-making process, continue

to press the “SELECT” button, the digit will change from 0 to 1, again 2, then return

0. After 5 seconds, the setting will complete and the digit will disappear and be

remembered by the controller. With digit 1 setting, it will add 1 minute to standard

duration time of each ice-making cycle, and the digit 2 setting, the added time will

be longer more. And if the unit is plugged on again, it will recover to the digit 0

setting with standard time.

4. The ice making cycle lasts 6 to 12 minutes, depending on the size of the ice cube

selection and the ambient temperature.

5. While the ice-maker is on, verify water level periodically. If water pump can’t pump

out water, the ice maker will stop automatically, and the symbol will light on

LCD displaying window and the arrow symbol will ash. Need to pour water into

the water reservoir inside. We suggest you should press “ON/OFF” button to turn

off the unit rst, then ll water up to the MAX level mark, again press “ON/OFF”

button to restart the unit. If you only ll the water in, but doesn’t press any button,

you will need to wait some time to desire the ice-cube. Allow the refrigerant liquid

inside the compressor at least 3 minutes to settle before restarting.

When Ice Full indicator is on

6. The ice maker automatically stops working when the ice-cube is full inside and the

ice full” symbol on LCD displaying window will be indicated.

How to obtain the ice-cube

7. Put your ice-cube container on drip tray, press the “ICE” button one time on control

panel (Button B in above illustration), the symbol will light on the LCD window,

then the ice cube pushing spring start to rotate, the ice-cube will fall down into your

ice-cube container from the ice-cube tap. And press the “ICE” button again, the

symbol will disappear in the LCD window, the internal pushing spring will stop

rotating and the ice-cube will not ow out again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10030848 Ice Volcano 2G in the language / languages: Dutch as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10030848 Ice Volcano 2G Manual

Product: