Manual Klarstein 10028003 (page 13 of 36) (English, German, French, Italian, Spanish)

778328

Zoom out

Zoom in

1/36

DEVICE USAGE

1. To ll the stove, remove it from the base station to ll the kettle, open the lid or ll it

through the spout. Fill the kettle with a minimum of 0.5 To maximum of 1.7 Litres of

water. Too little water will cause the kettle to switch off before the water boils.

Note: make sure that the lid is securely in place before placing the kettle on the base

station.

2. Place the kettle on the base station.

3. Connect the plug to the power outlet. Operate the switch. The power indicator

will light up. The water will now boil. If the water boils, the kettle will switch off

automatically. You can switch off the appliance at any time during boiling by

pressing the switch.

Note: make sure that the switch is accessible and is not blocked. If the switch is

blocked or the lid is open, the appliance will not shut off.

4. Remove the cooker from the base station and pour out the water

Note: be careful when pouring the water. Contact with boiling water can cause

burns.

5. The cooker will not boil until the switch is pressed again. Allow the unit to cool for

15 to 20 seconds before starting cooking again. The cooker can be left on the base

station when not in use.

Note: make sure the power is off when the cooker is not in use.

6. Dry run protection: if the cooker is accidentally left without water, the dry run

protection will automatically turn off the unit. If this occurs, allow the stove to cool

down before using it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10028003 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10028003 Manual

Product: