753547
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
EN
5 Plug the power lead into the supply socket, then press the green on/off switch on
the ice machine to start it - the green „run“ light will be lit. The Ice Baby will start to
operate.
6 The operation of the Ice Baker is completely automatic including. water inlet, ice
making, ice transfer and ice storage.
7 If the storage container is full, the „ice full“ indicator on the display panel will be
lit, and the ice machine will stop automatically. Remove the ice from the storage
container, wait for ve minutes, then restart the ice maker.
8 Should the water supply be restricted or fail, the „water low“ LED will be lit. The ice
maker will stop automatically. When the water supply is restored, wait for at least
ve minutes, then re-start the unit.
Important Notes on Use
If the compressor stops for any reasons such as water shortage, too much ice,
power off etcetera, don‘t restart it right away. You can restart it after 5 minutes in
order to protect the compressor.
Check the connectors of the water inlet and outlet, tubes and drain regularly for
surplus water that may be present.
When plugging in or unplugging, the plug should be held by hand and the wires
should not be dragged heavily.
CARE AND CLEANING
Always switch off and disconnect the power supply before cleaning
Warm, soapy water is recommended for cleaning. Cleaning agents may leave
harmful residues. Do not wash the base unit, instead wipe the exterior with a damp
cloth. Do not immerse in water,or use steam/jet washers to clean the unit.
Check regularly the connectors of the water inlet and outlet tubes and drain the little
surplus water that may leak.
Clean the water lter regularly with a small brush,particularly in hard water ares.
The water lter is located just inside the water inlet at the back of the appliance.
Replace any unused water in the tank at least once every 24 hours.
The inner removable parts and water tank should be cleaned regularly.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10013323 Powericer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10013323 Powericer in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info