Manual Klarfit 10033591 Barracuda (page 25 of 72) (English, German, French, Italian, Portuguese, Spanish)

777167

Zoom out

Zoom in

1/72

Cauon: Never attempt to remove a bent propeller pin by hitting it with a

hammer, as this could damage the engine mooring. Any resulting damage will

not be covered by the warranty.

Step 1 Step 2 Step 3

Changing the propeller

Attention

Make sure that the motor has been disconnected from batteries.

• Hold the blade of the propeller and loosen the propeller nut with the

included wrench or a set of needle nose pliers.

• Remove the propeller nut.

• Pull the propeller straight down.

• If the propeller gets stuck, hold one blade by hand and carefully beat

the back of the other blade with a rubber mallet until the propeller

disengages.

• If the propeller pin is bent, replace it.

• Place the new propeller on the propeller pin.

• Replace the propeller nuts and tighten them by hand.

• Finally, tighten the propeller nuts by a further 1/4 turn with the wrench.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarfit 10033591 Barracuda in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarfit 10033591 Barracuda Manual

Product: